nRF52840 AT Command USB Dongle MDBT50Q-RX-ATM

To have an easy understanding of Raytac’s AT Command USB Dongle, here provides the command table for reader’s easy reference.

We encourage readers to visit Raytac’s website to obtain the detail information

MDBT50Q-RX-ATM

MDBT50Q-RX-ATM-1.jpg

Raytac AT command is built based on Nordic UART service, aka NUS, which is similar to SPP (Serial Port Profile) applied in Classic Bluetooth (BT2 and BT3)

To service the Bluetooth bridging works, AT command modules or dongle comes with both Central/Master & Peripheral/ Slave role available.

Latest released MDBT50Q-RX-ATM is a USB dongle designated to connect to PC or Machine acted as the Central / Mater role supporting below commands.

List of supported commands

  • Setting of scanned device name
  • Setting of scanned base UUID/service UUID/TX character/RX character
  • Setting of scanned RSSI threshold
  • Selective data rate of 1M bps, 2M bps or 125K bps on-air
  • Set TX output power in 6 levels.
  • Set scanning time
  • Enable/disable scanning
  • Set LED pattern indicating scanning or connecting status
  • Auto UART baud rates
  • Use external 32.768KHz oscillator
  • Recover-to-default setting with software method
  • System reset of software
  • Set serial number and retrieve
  • Retrieve MAC Address
  • Support maximum MTU 247bytes / data payload up to maximum 244 bytes

MDBT50Q-RX-ATM-2 Command Table.jpg

Raytac Corporation 勁達國際電子有限公司

A BT5 & BT 4.2 & BTv4.1 module maker based on Nordic nRF51 & nRF52 solution

(nRF51822 & nRF52832 & nRF52810 & nRF52811 & nRF52840)

www.raytac.com email: cs@raytac.com Tel: +886.2.3234.0208

 

Raytac Central Role AT Command USB Dongle MDBT50Q-RX-ATM Released

Raytac today announced (Central / Master) AT command dongle released.

Part No.:

MDBT50Q-RX-ATM

Raytac AT Command Module Family

nRF52840 is Nordic’s latest and advanced solution, which brings a new interface “USB” from other lines, has drawn the attention among developers. 


Raytac developed AT Command  (Master / Central ) solution based on nRF52840 solution, fulfilled the demand of USB interface, missioned to deliver a full coverage of AT Command product line.


Raytac’s nRF52840 USB AT Command dongle, MDBT50Q-RX-ATM is a BT5, FCC/IC/CE/Telec/KC/SRRC/NCC/RCM/WPC pre-certified dongle which is  eliminating the need for RF design expertise, and speeding time to market for complex M2M IoT applications. 


AT command module is an easy solution provides developers a quick breakthrough to Bluetooth connection. Without firmware effort needed, simply have commands setting on MCU and the start to enjoy the implement of bridging connectivity between devices through Bluetooth.

After Raytac’s completed both Central (Master) & Peripheral (Salve) role AT command module projects, the USB interface has brought up the strongest demand by developers.

Raytac Corporation 勁達國際電子有限公司
A BT5 & BT 4.2 & BTv4.1 module maker based on Nordic nRF51 & nRF52 solution
(nRF51822 & nRF51422 & nRF52832 & nRF52810 & & nRF52811 &nRF52840)
www.raytac.com email: cs@raytac.com Tel: +886.2.3234.0208

 

AT-Command Module Tutorial ~ About First Time Connect To The DK Demo Board

Raytac AT Command Family

With strong demand for AT command module coming up from markets, here provides an easy introduction about hardware and software setup work for Raytac’s AT command module demo board for quick start.

Raytac nRF52810 Module Incorporated AT Command Over UART Service (NUS) Coming Soon!

UART Service (NUS) is the most convenient and common Bluetooth Lower Energy proprietary service for all developers.
Raytac has introduced NUS (UART) BT4.2 and BT5 solution in previous article.

MDBT42Q-P192K-nRF52810 Nordic.jpg

nRF52 series SoC has below features rather than nRF51
1. nRF52 supports Longer Package MTU
(500 Bytes for Baudrate 9600 / over 10K for 115200 or 230400)
2. nRF 52 has over 10 times higher transmission speed than nRF51
3. nRF52 only needs 1/10 (or less) transmission time  than nRF51
 
Raytac has been hearing from developers about the demand of AT command over UART service based on Nordic Solution.
Learnt from customers’ feedback, Raytac realized that Long Package MTU is the recent critical demand for all customers and IoT applications.
As such, Raytac hardware team has selected Nordic nRF52810 solution , powered by firmware design team to develop a coming AT Command Over UART Service Solution.
The features of the AT Command Over UART solution not only brings a cost effective module, but an easy and user familiar method enables an easy and time-to-market efficiency.
Nordic nRF52810 module part no.
MDBT42Q-P192K (PCB Antenna Version)
MDBT42Q-192K (Ceramic Antenna Version)
 
Nordic nRF52810 AT Command Module-MDBT42Q-PAT
44195865 – abstract molecule structure on dark blue color background. vector illustration of communication – network for futuristic technology concept
Raytac Corporation
A BT4.1 & BT4.2 & BT5 module maker based on Nordic nRF51 & nRF52 solution 
(nRF51822 & nRF51422 & nRF52832 & nR52810 & nRF52840)
www.raytac.com            Tel: +886.2.3234.0208
email: service@raytac.com

nRF52810 UART service (NUS) Solution (Raytac Module: MDBT42Q-192K)

Nordic released nRF52810 aimed to provide a low entry barrier for developers to explore Bluetooth Low Energy implements.To improve the effective cost, nRF52810 has provided a limited RAM (24K) and Flash Memory (192K) specification.
Among the BLE implements, Raytac is aware that the UART service (as known as NUS, Nordic UART service) is the most common and widely applied service which is used to called as SPP in classic Bluetooth.

Nordic nRF51822 UART Service Solution (Module: MDBT40)

More information about UART service (AT Command), Pls refer to below link

https://raytac.blog/2018/03/28/nordic-nrf52810-at-command-ble-module-by-raytac-mdbt42q-pat/

UART service, as known as NUS (Nordic UART Service) is the most common and easy way for BLE relating IoT Implement.
Customers who is familiar with Classic Bluetooth are used to call as SPP service.

Nordic nRF52832 UART Service Solution (Module: MDBT42Q)

UART service, as known as NUS (Nordic UART Service) is the most common and easy way for BLE relating IoT Implement.
Customers who is familiar with Classic Bluetooth are used to call as SPP service.
nrf52832-mtu-500bytes-transmission-demo