標籤: CE

Nordic nRF52832 Module (Raytac MDBT42Q Series Module)

發表於 由撰寫發表留言

img_0720-%e6%8b%b7%e8%b2%9d img_0732-%e6%8b%b7%e8%b2%9d

Raytac Corporation has developed several module series based on Nordic nRF52832 solution, which is based on Bluetooth specification: BT4.2 and ready for BT5

MDBT42Q/MDBT42Q-P (called as MDBT42Q Series module in below) are the most friendly items that customers pay attention to.

MDBT42Q series module is a powerful, highly flexible ultra-low power multiprotocol module ideally suited for Bluetooth® low energy, ANT and 2.4GHz ultra low-power wireless applications. It is built based on Nordic nRF52832 SoC with 32-bit ARM® Cortex™-M4F CPU with 512kB + 64kB RAM with I2C, SPI, UART interface. With a widely certification granted, it can help all developers and customers have the benefit to speedy up the developing schedule and reliable quality.

繼續閱覽 “Nordic nRF52832 Module (Raytac MDBT42Q Series Module)"

Nordic nRF52 Module Product Line Up (Raytac MDBT42 Series)

發表於 由撰寫發表留言

Raytac Corporation

A BT4.1 & BT4.2 module maker based on Nordic nRF51 & nRF52 solution

(nRF51822 & nRF51422 & nRF52832 & nRF51802)

www.raytac.com

Tel: +886.2.3234.0208

email: service@raytac.com

http://raytaccorp.blogspot.jp/2016/11/nordic-nrf52-module-product-line-up.html

MDBT42Q Series

MDBT42Q&MDBT42Q-P Spec Sheet (nRF52832)

http://www.raytac.com/download/MDBT42/MDBT42Q-Version%20B.pdf

MDBT42Q&MDBT42Q-P footprint (Pls change the footprint file name from .li to .lib to open it)

https://mega.nz/#!ElhDCA4I!Dp-gsXhyPhfAx0dcOseNXdPzOWYJz0XTlrEH3ZCXWgg

MDBT42 Series

Will be available by middle of Nov. 2016

MDBT42V Series

Will be available by Jan. 2017

Raytac nRF52 BLE Module-20161102.png

 

About MDBT42Q (Nordic nRF52 Solution) BT4.2 Module

發表於 由撰寫發表留言

Raytac Corporation

A BT4.1 & BT4.2 module maker based on Nordic nRF51 & nRF52 solution 

(nRF51822 & nRF51422 & nRF52832 & nRF51802)

www.raytac.com

Tel: +886.2.3234.0208

email: service@raytac.com  

http://raytaccorp.blogspot.tw/2016/10/about-mdbt42q-bt42-module.html

Many customers are interested in MDBT42Q based on Nordic nRF52832 solution.

Raytac’s MDBT42Q has started mass production and has widely shipped worldwide.

To provide a better service and easy customers safety regulation cost, Raytac’s remain the policy to apply module approval for most of the countries.

Allow for safety regulation requested, Raytac’s MDBT42Q has equipped the shielding case with certificate no. engraved.

Safety Regulation Approval Countries 

FCC (USA): SH6MDBT42Q

IC (Canada): 8017A-MDBT42Q

Telec (Japan): 201-260496

SRRC (China): CMIIT ID: 2016DJ4571

Taiwan (NCC) : MDBT42Q (CCAM16LP1180T2) / MDBT42Q-P (CCAM16LP1181T1)

KCC (Korea): MSIP-CRM-ryt-MDBT42Q

CE (EU): R&TTE (EN300328 V1.9.1)

MDBT42Q / MDBT42Q-P Safety Regulation Granted List

發表於 由撰寫發表留言
Raytac Corporation
A BT4.1 & BT4.2 module maker based on Nordic nRF51 & nRF52 solution 
(nRF51822 & nRF51422 & nRF52832 & nRF51802)
www.raytac.com
Tel: +886.2.3234.0208
email: service@raytac.com  
http://raytaccorp.blogspot.tw/2016/10/mdbt42q-safety-regulation-granted-list.html
Raytac MDBT42Q series module has following safety regulation granted.
Item: MDBT42Q / MDBT42Q-P
USA (FCC): SH6MDBT42Q
Canada (IC): 8017A-MDBT42Q
Japan( Telec): 201-260496
Korea (KCC): MSIP-CRM-ryt-MDBT42Q
China (SRRC): CMIIT ID: 2016DJ4571
Taiwan (NCC) : CCAM16LP1180T2 (MDBT42Q) / CCAM16LP1181T1 (MDBT42Q-P)
EU (CE): R&TTE V1.9.1 Report

MDBT42Q Series Module (Nordic nRF52 Solution) Spec Sheet Updated

發表於 由撰寫發表留言
Raytac Corporation
A BT4.1 & BT4.2 module maker based on Nordic nRF51 & nRF52 solution 
(nRF51822 & nRF51422 & nRF52832 & nRF51802)
www.raytac.com
Tel: +886.2.3234.0208
email: service@raytac.com  
http://raytaccorp.blogspot.tw/2016/08/mdbt42q-series-module-nordic-nrf52.html
http://bluetooth.tokyo
MDBT42 and MDBT42Q, solution by Nordic nRF52832, recently has FCC/CE/IC/Telec/SRRC/NCC granted.
We are sincerely invite all developers to download the updated Specification Sheet from below Link.
Products which built by MDBT42 or MDBT42Q now allowed to get rid of annoying safety regulation application and testing but ship and marketing in USA, Canada, Japan, China according to Module Approval Policy.
MDBT42 & MDBT42-P Spec Sheet Download Link
http://www.raytac.com/download/MDBT42/MDBT42Q-Version%20B.pdf

有關 FuTKEE 與 RED

發表於 由撰寫發表留言
Raytac Corporation 勁達國際電子有限公司
A BT4.1 & BT4.2 module maker based on Nordic nRF51 & nRF52 solution
(nRF51822 & nRF51422 & nRF52832 & nRF51802)
Tel: +886.2.3234.0208         email: service@raytac.com
近來, 很多使用勁達國際電子藍牙模組的客戶提到 FuTKEE 與RED
 基本上, FuTKEE指的就是新的CE無線指令RED,但目前都還是Draft都還在修正,目前還無法執行
 預計2016年底或2017年初,才會有比較明確的消息,針對所有的無線產品都會有改動
 
最新歐洲無線設備指令2014/53/EU
在新無線設備指令（RED）中和舊R＆TTE指令的重大區別有：
  • RED產品范圍僅包括無線通讯和無線識别設備（如RFID，雷達，移動偵测等）。射频設備不用於通讯或者識别的會在電磁兼容EMC指令和低電壓LVD指令的管控中
  • 有線通訊終端設備（TTE）被移除，因此RED指令僅用於無線產品
  • 無線廣播接收機現已纳入RED指令的範圍（之前涵蓋在電磁兼容EMC指令和低電壓LVD指令中）
  • 指令覆蓋頻率下限已取消（之前R＆TTE的管控起始頻率是9千赫），而上限依然是3000兆赫
  • 公告機構評估意見現已由“型式檢查證書”取代
  • 制造商只有在其品質體系經過公告機構评估過後，才能使用附上公告機構號碼的CE標誌（完全品質保証 – 型式高）
  • 二類設備向各國頻譜機構進行通告的要求不再需要
  • 二類設備的標識（驚嘆號）不再需要，不過在某些國家受限使用的警示依然需要出現在產品包装上
  • 不再需要在用户手册中出現CE標誌，不過手册中必须注明射頻使用的頻段及發射功率
  • 個人評估用的套件不再受管控（即不需要進行RED認證）
  • 新指令要求使用統一的充電器
  • 制造商及入口商的地址及聯絡方式必須出現在設備上，而當設備太小時可以出現在用户手册中
現有的這些改動及未来的其他改動将會影響到客戶在今年和未来幾年的產品認証，所以建議從現在就必須開始将新指令考虑到產品的設計和市場销售中

勁達國際 藍牙模組(MDBT40 / MDBT40-P) 與地區性法規綜覽

發表於 由撰寫發表留言

Raytac Corporation 勁達國際電子有限公司

A BT4.1 & BT4.2 module maker based on Nordic nRF51 & nRF52 solution

(nRF51822 & nRF51422 & nRF52832 & nRF51802)

Tel: +886.2.3234.0208         email: cs@raytac.com

 

 

一個具有最大效益的藍牙模組必須具有以下兩大類安規測試

 

1. BQB Qualification

藍牙的測試一般稱為 BQB

其主要有兩大類

一是RF PHY 的硬體測試 , 其二是藍牙Profile 的相容性測試

模組唯有具備兩者測試者並依此申請 DID (Declaration)者, 才有辦法稱為是一個完全模組

 

勁達國際電子的模組 MDBT40/MDBT40-P 不僅已通過硬體的RF PHY 測試 , Profile 的相容性測試更囊括所有 Nordic 的profile

並依此申請 DID (Declaration ID)

因此,  客戶使用勁達所生產的模組是可以泛用於完全模組政策, 意即可以把日後的所有藍牙產品登錄在一個相同的 DID 之下的Product List

不需再為各別產品一一送測及購買 DID

 

2. 地區性的無線法規Regional RF Safety Regulation

很多勁達的客戶很好奇, 為什麼勁達的模組鐵蓋上打了密密麻麻的字

主要是因為, 勁達的模組是遵循完全模組政策

一個完全模組必須具備以下因素

1. 獨立的天線

2. 需有鐵蓋遮蔽

3. 鐵蓋上必須有各國法規要求的文字

 

不同於BQB, 地區性的無線法規是各國海關邊境與市售的強制要求

由於勁達所生產的模組已是完全模組

因此以此模組所製成的成品

除歐盟與澳洲外 , 客戶的成品都可以依照完全模組政策免測RF 的安規項目

 

勁達的模組現已通過以下國家的安規認證

Regional RF Safety Regulation Granted List

 

Country              Safety Regulation

美國                          FCC

加拿大                      IC

日本                         Telec

中國                         SRRC

歐盟                         CE

台灣                         NCC

巴西                         ANATEL

澳洲                         RCM (C-Tick)

阿根廷                     CNC

墨西哥                     IFETEC

螢幕快照 2016-01-29 14.53.43.png

Raytac BT Module BQB & Safety Regulation Summary

發表於 由撰寫發表留言
Raytac Corporation
A BT 4.1 & BT 4.2 & BT 5.0 module maker based on Nordic nRF51 & nRF52 solution 
(nRF51822 & nRF51422 & nRF52832 & nRF51802)
www.raytac.com            Tel: +886.2.3234.0208
email: service@raytac.com
http://raytaccorp.blogspot.tw/2016/01/raytac-bt-module-bqb-safety-regulation.html
A Bluetooth module needs to have 2 factors certification.
1. BQB Qualification
BQB testing is including RF PHY & Profiles interoperability testing.
Module only applied BQB with BOTH 2 tests can comply with Module Policy.
SIG Declaration ID (also known as DID) is essential.
 
Raytac’s MDBT40/MDBT40-P module past hardware RF PHY testing but also has past all Nordic profiles interoperability tests.
 
As such, customers who is using Raytac’s module to build up the products can follow the Module Policy  which means can just sublist all products under single DID’s Product List without applying another.
 
2. Regional RF Safety Regulation
Many of Raytac’s customers are curious why Raytac modules have so many no. on the shielding case.
Similar to BQB qualification, to have Antenna+Shielding case+ Qualification Report No. on shielding is essential condition to comply Module Policy for regional RF Safety Regulation.
Different from BQB, Regional RF Safety Regulation is law enforce issue in custom for every border.
Raytac’ MDBT40/MDBT40-P has complied following safety regulation in different countries by Module Policy.
Excepting CE and RCM which are not conducting Module policy, Raytac modules can bring a easy way for all customers to save time and cost without further regulation testing again in finished products.

Regional RF Safety Regulation Granted List

Country              Safety Regulation
USA                          FCC
Canada                     IC
Japan                        Telec
China                        SRRC
EU                             CE
Taiwan                      NCC
Brazil                        ANATEL
Australia                   RCM (C-Tick)
Argentina                  CNC
Mexico                       IFETEC
Quoted from Nordic Official Site 3rd Party Bluetooth Smart Modules
螢幕快照 2016-01-29 14.53.43

Raytac MDBT40/MDBT40-P Australia & New Zealand RCM (C-Tick) Certification Granted

發表於 由撰寫發表留言
Raytac Corporation
A BT4.1 & BT4.2 module maker based on Nordic nRF51 & nRF52 solution 
(nRF51822 & nRF51422 & nRF52832 & nRF51802)
www.raytac.com
Tel: +886.2.3234.0208
email: service@raytac.com
http://raytaccorp.blogspot.com/2016/01/raytac-mdbt40mdbt40-p-australia-new.html
 
To enhance users and developers’ convenience and feasibility is our passion and mission for our modules.
 
The action of expanding different regional RF regulation coverage for different countries is the most efficiency way to benefit for all of our customers.
Excepting the certification we already granted such as FCC/CE/IC/SRRC/Telec/NCC,
we are pleased to announce that Raytac MDBT40 and MDBT40-P have the RCM (C-tick) certified.
We believed that this step ahead may help all our customers to explore Australia and New Zealand market.
Raytac Module Regional Certification Granted List as below
(Updated from time to time)
FCC: USA
IC: Canada
CE: EU
Telec: Japan
SRRC: China
NCC: Taiwan
RCM (C-Tick): Australia & New Zealand