標籤: Module

有關 FuTKEE 與 RED

發表於 由撰寫發表留言
Raytac Corporation 勁達國際電子有限公司
A BT4.1 & BT4.2 module maker based on Nordic nRF51 & nRF52 solution
(nRF51822 & nRF51422 & nRF52832 & nRF51802)
Tel: +886.2.3234.0208         email: service@raytac.com
近來, 很多使用勁達國際電子藍牙模組的客戶提到 FuTKEE 與RED
 基本上, FuTKEE指的就是新的CE無線指令RED,但目前都還是Draft都還在修正,目前還無法執行
 預計2016年底或2017年初,才會有比較明確的消息,針對所有的無線產品都會有改動
 
最新歐洲無線設備指令2014/53/EU
在新無線設備指令（RED）中和舊R＆TTE指令的重大區別有：
  • RED產品范圍僅包括無線通讯和無線識别設備（如RFID，雷達，移動偵测等）。射频設備不用於通讯或者識别的會在電磁兼容EMC指令和低電壓LVD指令的管控中
  • 有線通訊終端設備（TTE）被移除，因此RED指令僅用於無線產品
  • 無線廣播接收機現已纳入RED指令的範圍（之前涵蓋在電磁兼容EMC指令和低電壓LVD指令中）
  • 指令覆蓋頻率下限已取消（之前R＆TTE的管控起始頻率是9千赫），而上限依然是3000兆赫
  • 公告機構評估意見現已由“型式檢查證書”取代
  • 制造商只有在其品質體系經過公告機構评估過後，才能使用附上公告機構號碼的CE標誌（完全品質保証 – 型式高）
  • 二類設備向各國頻譜機構進行通告的要求不再需要
  • 二類設備的標識（驚嘆號）不再需要，不過在某些國家受限使用的警示依然需要出現在產品包装上
  • 不再需要在用户手册中出現CE標誌，不過手册中必须注明射頻使用的頻段及發射功率
  • 個人評估用的套件不再受管控（即不需要進行RED認證）
  • 新指令要求使用統一的充電器
  • 制造商及入口商的地址及聯絡方式必須出現在設備上，而當設備太小時可以出現在用户手册中
現有的這些改動及未来的其他改動将會影響到客戶在今年和未来幾年的產品認証，所以建議從現在就必須開始将新指令考虑到產品的設計和市場销售中

Raytac nRF52 Module MDBT42 & MDBT42-P Released in Nordic Partner List

發表於 由撰寫發表留言
Raytac Corporation
A BT4.1 & BT4.2 module maker based on Nordic nRF51 & nRF52 solution 
(nRF51822 & nRF51422 & nRF52832 & nRF51802)
www.raytac.com
Tel: +886.2.3234.0208
email: service@raytac.com  
http://raytaccorp.blogspot.tw/2016/02/raytac-nrf52-module-mdbt42-mdbt42-p.html
As the strong partner of Nordic, Raytac’s nRF52 Module (P/N: MDBT42 & MDBT42-P) has been listed in Nordic’s website.
Again, module factor, Raytac one is still smaller than others.
MDBT42    : Chip Antenna Version with shielding case, Size: 13.8 x 8.8 x 1.9mm
MDBT42-P: Printed Antenna Version with shielding case, Size: 13.8 x 8.8 x 1.9mm
MDBT42Q : Chip Antenna Version with shielding case, Size: 16.0 x 10.0 x 2.2mm
MDBT42Q-P: Printed Antenna Version with shielding case, Size: 16.0 x 10.0 x 2.2mm

 

Raytac BT Module BQB & Safety Regulation Summary

發表於 由撰寫發表留言
Raytac Corporation
A BT 4.1 & BT 4.2 & BT 5.0 module maker based on Nordic nRF51 & nRF52 solution 
(nRF51822 & nRF51422 & nRF52832 & nRF51802)
www.raytac.com            Tel: +886.2.3234.0208
email: service@raytac.com
http://raytaccorp.blogspot.tw/2016/01/raytac-bt-module-bqb-safety-regulation.html
A Bluetooth module needs to have 2 factors certification.
1. BQB Qualification
BQB testing is including RF PHY & Profiles interoperability testing.
Module only applied BQB with BOTH 2 tests can comply with Module Policy.
SIG Declaration ID (also known as DID) is essential.
 
Raytac’s MDBT40/MDBT40-P module past hardware RF PHY testing but also has past all Nordic profiles interoperability tests.
 
As such, customers who is using Raytac’s module to build up the products can follow the Module Policy  which means can just sublist all products under single DID’s Product List without applying another.
 
2. Regional RF Safety Regulation
Many of Raytac’s customers are curious why Raytac modules have so many no. on the shielding case.
Similar to BQB qualification, to have Antenna+Shielding case+ Qualification Report No. on shielding is essential condition to comply Module Policy for regional RF Safety Regulation.
Different from BQB, Regional RF Safety Regulation is law enforce issue in custom for every border.
Raytac’ MDBT40/MDBT40-P has complied following safety regulation in different countries by Module Policy.
Excepting CE and RCM which are not conducting Module policy, Raytac modules can bring a easy way for all customers to save time and cost without further regulation testing again in finished products.

Regional RF Safety Regulation Granted List

Country              Safety Regulation
USA                          FCC
Canada                     IC
Japan                        Telec
China                        SRRC
EU                             CE
Taiwan                      NCC
Brazil                        ANATEL
Australia                   RCM (C-Tick)
Argentina                  CNC
Mexico                       IFETEC
Quoted from Nordic Official Site 3rd Party Bluetooth Smart Modules
螢幕快照 2016-01-29 14.53.43

Raytac MDBT40/MDBT40-P Australia & New Zealand RCM (C-Tick) Certification Granted

發表於 由撰寫發表留言
Raytac Corporation
A BT4.1 & BT4.2 module maker based on Nordic nRF51 & nRF52 solution 
(nRF51822 & nRF51422 & nRF52832 & nRF51802)
www.raytac.com
Tel: +886.2.3234.0208
email: service@raytac.com
http://raytaccorp.blogspot.com/2016/01/raytac-mdbt40mdbt40-p-australia-new.html
 
To enhance users and developers’ convenience and feasibility is our passion and mission for our modules.
 
The action of expanding different regional RF regulation coverage for different countries is the most efficiency way to benefit for all of our customers.
Excepting the certification we already granted such as FCC/CE/IC/SRRC/Telec/NCC,
we are pleased to announce that Raytac MDBT40 and MDBT40-P have the RCM (C-tick) certified.
We believed that this step ahead may help all our customers to explore Australia and New Zealand market.
Raytac Module Regional Certification Granted List as below
(Updated from time to time)
FCC: USA
IC: Canada
CE: EU
Telec: Japan
SRRC: China
NCC: Taiwan
RCM (C-Tick): Australia & New Zealand

MDBT40 (nRF51) VS. MDBT42 (nRF52)

發表於 由撰寫發表留言
Raytac Corporation
A BT4.1 & BT4.2 module maker based on Nordic nRF51 & nRF52 solution 
(nRF51822 & nRF51422 & nRF52832 & nRF51802)
www.raytac.com
Tel: +886.2.3234.0208            email: service@raytac.com
 
http://raytaccorp.blogspot.tw/2015/12/mdbt40-vs-mdbt42.html
 
MDBT40 series module is small, but MDBT42 makes the definition of MDBT40 become bigger!
IMG_3088.JPG
                    Bluetooth    GPIO     Dimension
MDBT40      BT4.1            31         18.0 x 10 x 2.7
MDBT42      BT4.2           32         13.8 x 8.8 x 1.9
MDBT42Q   BT4.2           32         16.0 x 10.0 x 2.2

Raytac Released nRF52 Module (P/N: MDBT42-512 / MDBT42-P512)

發表於 由撰寫發表留言
Raytac Corporation
A BT4.1 & BT4.2 module maker based on Nordic nRF51 & nRF52 solution 
(nRF51822 & nRF51422 & nRF52832 & nRF51802)
www.raytac.com
Tel: +886.2.3234.0208                     email: service@raytac.com
 
http://raytaccorp.blogspot.tw/2015/12/raytac-released-nrf52-module-pn-mdbt42.html
Raytac is pleased to released latest module based on Nordic nRF52 (nRF52832) solution for BT4.2.
 

Part No.P/N: MDBT42-512  (Chip Antenna Version)

P/N: MDBT42-P512 (Printed Antenna Version)

GPIO: 32
Dimension: 13.8 x 8.8 x 1.9 mm (L x W x H)
Expected Transmission: Over 80M (Chip Antenna) / 60M (Printed Antenna)
Expected MP schedule: 2016 1Q
RF regulation Certification completed: 2016 2Q

nRF51 Module Family Released in 2016 (Model: MDBT40-PC256)

發表於 由撰寫發表留言
Raytac Corporation
A BT4.1 & BT4.2 module maker based on Nordic nRF51 & nRF52 solution 
(nRF51822 & nRF51422 & nRF52832 & nRF51802)
www.raytac.com
Tel: +886.2.3234.0208              email: service@raytac.com
http://raytaccorp.blogspot.tw/2015/12/nrf51-module-family-released-in-2016.html
 
Raytac is planning to release a new item in 2016 1Q to complete the Bluetooth Low Energy product series.
Model Name: MDBT40-PC256
Solution: Nordic nRF51 Series
RAM: 16K
Flash Memory: 256K
FullSizeRender 4

nRF5 SDK supports IoT over Bluetooth Smart

發表於 由撰寫發表留言

Raytac Corporation
A BT4.1 & BT4.2 module maker based on Nordic nRF51 & nRF52 solution 
(nRF51822 & nRF51422 & nRF52832 & nRF51802)
www.raytac.com
Tel: +886.2.3234.0208
email: service@raytac.com
 
http://raytaccorp.blogspot.tw/2015/12/nrf5-sdk-supports-iot-over-bluetooth.html
Now both ‪#‎nRF51‬ & ‪#‎nRF52‬ Support IPv6 Over Bluetooth Smart.‪#‎nRF5SDK‬
Quoted from Nordic: http://www.nordicsemi.com/eng/Products/Bluetooth-Smart-Bluetooth-low-energy/nRF5-SDK-for-IoT
This SDK is a IPv6 capable Bluetooth® Smart software stack that provides drivers, libraries, examples, and APIs for nRF52 Series devices. It includes an IPv6 over Bluetooth Smart adaptation layer (6LoWPAN) and a complete Internet Protocol Suite including IPv6, ICMP, UDP, TCP, DTLS, TLS, CoAP and MQTT. It brings native IPv6 support to Bluetooth Smart applications, letting them talk directly to cloud services and other connected ‘things’ over IP-based networks.
The SDK includes examples that configure the nRF52 device as a Bluetooth Smart 6LoWPAN node and that interface with the IP layers at transport level (UDP amd TCP) and with security (DTLS and TLS), to the application level CoAP and MQTT and LWM2M. Examples of how to connect to cloud services is also included in the documentation. The SDK also includes an implementation to for over the air upgrade for Bluetooth Smart IPv6 nodes over IP using the trivial file transport protocol (TFTP).
As a router for development an off-the-shelf router running OpenWRT or a Raspberry Pi can be used. A solution for commissioning of Bluetooth Smart IPv6 nodes to a router with a mobile phone as a trusted third party is also included. Source code for the commissioning app and the needed OpenWRT daemon is also available. All this is described in the documentation.
The nRF5 IoT SDK documentation are available at our infocenter.
The nRF5 IoT SDK zip and pack version are available for download developer.nordicsemi.com.

FEATURES

6LoWPAN and IPSP library:
  • 6LoWPAN compression/decompression
  • 6LoWPAN node role
  • Packet flow control
  • IPv6 prefix management
IPv6 stack:
  • Support for multiple IPv6 addresses
  • ICMPv6 module
  • UDP socket APIs
  • DNS client
  • SNTP client
  • TFTP client
CoAP library:
  • CoAP message types CON, NON, ACK, and RESET
  • Token matching
  • Endpoint creation as resources
  • Support for observable resources and observing resources
  • Support for DTLS
  • Support for block transfer
MQTT library:
  • Publisher and Subscriber role
  • Support for QoS0, QoS1 and QoS2
  • Flow control messages to application
  • MQTT message encoder/decoder
  • Support for version 3.1.1 and 3.1.0
  • TLS support
LWM2M library:
  • Client initiated boostrap
  • Server registration/deregistration/update
  • “LWM2M" and “IPSO Smart Objects" objects
  • LWM2M TLV encoder/decoder
  • DTLS support
BSD Socket Interface:
  • Client UDP and TCP
  • Supports Blocking and Non-Blocking I/O
  • Compatible with POSIX Socket Interface

藍牙 4.0 模組經銷夥伴～立寰科技

發表於 由撰寫發表留言

勁達國際電子(Raytac Corporation)
www.raytac.com
藍牙4.0/藍牙4.1/藍牙4.2模組(藍牙模塊) 製造供應商 (Nordic nRF51 /nRF52方案)
Nordic nRF51822 / nRF51422/nRF52832/NRF51802
Tel: 02-3234-0208    email: sales@raytac.com

http://raytacbt4.blogspot.tw/2015/12/40.html

‪#‎Raytac‬ is glad to announce acquiring ‪#‎ConcordTechnology‬ in Great China Zone distributor network.
為能提供大中華區客戶更便捷的服務與流通性 ‪#‎勁達國際電子有限公司‬ 歡迎 ‪#‎立寰科技股份有限公司‬ 加入大中華區 ‪#‎BT4‬.0 ‪＃‎藍牙模組‬ 的經銷夥伴
立寰科技股份有限公司
PM: Mr. Morris Shyu
morris@concord-at.com
Mobile: 0963-359-360

Nordic+ADI = 完整的 IoT解決方案 (BLE+Sensor)

發表於 由撰寫發表留言

勁達國際電子(Raytac Corporation)
www.raytac.com
藍牙4.0/藍牙4.1/藍牙4.2模組(藍牙模塊) 製造供應商 (Nordic nRF51 /nRF52方案)
Nordic nRF51822 / nRF51422/nRF52832/NRF51802
Tel: 02-3234-0208
email: sales@raytac.com

如同大家所期待的,  物聯網勢必將會引領未來的產業革命與潮流
今日, 所有產業無不希望能透過物聯網的應用, 將便利性帶給消費者以提升產品的附加價值

物聯網的兩大議題 BLE (低功耗藍牙)+Senser（感測器）
結合兩者的綜合複雜韌體開發是今日所有開發者的最大困擾
也是令開發者駐足不前, 甚至觀望的主要原因

勁達國際電子有限公司與安富利ADI team（台灣）近來開始合作
希望透過雙方合作的參考方案
能提供給所有的開發者一個更快也更方便的捷徑進入物聯網的世界
搶得世界脈動的先機

When ‪#‎Nordic‬ meets ‪#‎ADI‬……a perfect combination to hatch IoT implements
‪#‎AvnetAsia‬ Reference Design Works:
Water PH Monitor Reference Design (‪#‎CN0326‬+MDBT40)
Gas Detector Reference Design (‪#‎CN0357‬/0234+MDBT40)
Heart Rate Reference Design (‪#‎AD8232‬+MDBT40)
Single Phase Power Meter Reference Design (‪#‎ADE7952‬+MDBT40)
Energy Harvest Reference Design (‪#‎ADP5090‬+MDBT40)
Motion Sensor Reference Design (‪#‎ADXL362‬+MDBT40)
Temp Sensor Reference Design (‪#‎ADT7420‬+MDBT40)
歡迎大家與我們或安富利(台灣）ADI team  聯絡獲得更詳盡的資訊
安富利ADI team
PM: Kevin Yeh (kevin.yeh@avnet.com)
螢幕快照 2015-12-08 下午2.21.47