Wireless Certification For Wirepas Massive On Pre-Certified Module

Does the end products need to perform certification test again if using Wirepas Massive software on a Pre-certified Bluetooth module? The Answer is “No”!

Local wireless regulation is the obligation for all devices need to follow. Raytac recently have received several queries from customers asking about if products built by Raytac’s Bluetooth modules need to perform FCC testing again if loaded Wirepas Massive software (aka Wirepas Mesh)?

Wireless regulation by countries may simply divided into 2 categories which are modular policy and non-modular policy. Countries like USA (FCC), Canada (IC), Japan (MIC/Telec)…etc. are following modular policy which means end products do not need to perform wireless testing and allow to use certified module ID on end products directly without further testing required. For non-modular policy countries like Europe (CE), the end products can only reference part of module testing report but still need perform the testing based on product base.

Bluetooth modules loaded Wirepas software would not change the wireless characteristics and features in term of frequency, channels, modulation, transmit power and antenna from original. Therefore, the original module certification and testing report can be referenced, used and leveraged.

Wirepas, an IoT software provider offers a flexible, scalable, and high reliability connectivity solution has been significantly reducing the cost and complexity over projects. The long-standing partnership between Raytac and Wirepas framed a combined hardware and software solution, has built up an ecosystem by providing a per-certified module and ready-to-use software successfully shorten time-to-market for system integrations and accelerate business.

Raytac Corporation 勁達國際電子有限公司
A BT5.3 & BT5.2 & BT5.1 module maker based on Nordic nRF53 & nRF52 solution 
(nRF5340 & nRF52840 & nRF52833 & nRF52832 & nRF52820 & nRF52811 & nRF52810 & nRF52805 & nRF51822)
www.raytac.com. email: cs@raytac.com. Tel: +886.2.3234.0208

Raytac Product Change Notice (PCN) Announcement for nRF52840 Dongle: MDBT50Q-RX

Dear Customers,

To enable hardware reset function in Raytac’s nRF52840 dongle (P/N: MDBT50Q-RX), Raytac’s has revised the circuit and issued the PCN accordingly.


Description of the Change:

1. Change circuit design to enable the hardware reset function.
2. Change PCB Imprint
3. Change Label
4. Change Part No.

Here provided the content of the PCN for customer’s reference.

PCN-19031801-1
PCN-19031801-2

Customers who have been developing firmware based on pervious dongle, please contact with service@raytac.com to request the latest sample version for evaluation.
Raytac Corporation 勁達國際電子有限公司
A BT5 & BT 4.2 & BTv4.1 module maker based on Nordic nRF51 & nRF52 solution
(nRF51822 & nRF51422 & nRF52832 & nRF52810 & nRF52840)
www.raytac.com email: cs@raytac.com Tel: +886.2.3234.0208