How To Get Started With nRF5340 Module Program Coding and Compiling

Raytac Corporation 的大頭貼Written by

發表於 2 則迴響

Intro:

As the chipset of nRF5340 is built by Dual Core structure (net core and application core), we need to proceed the coding and compiling process individually to net core & application core.

After the coding and compiling process done, we could get the separate zephyr.hex file respectively which are used for BLE module FW.

 Firmware Development Steps : Code Building / Compiling

Case Study :　

A. NON-Audio Project

     nRFConnect SDK V2.6.0

     Nordic Example code – “peripheral_uart”

  1. Nordic example code of “hci_ipc” extracted for coding and we will get zephyr.hex file for net core
  2. Nordic example code of “peripheral_uart” extracted for coding and we will get zephyr.hex file for application core

Step 1. Net core Layer

1a) Activate “Open VS Code” IDE in NCS V2.6.0

1b) Select “Add an existing application” and extract “hci_ipc” file moving forward

1c) Click “Add Build Configuration” icon

1d) Select “nrf5340dk_nrf5340_cpunet” and check Nordic boards then Execute “Build Configuration”

1e) zephyr.hex file is successfully generated for net core layer if the coding process is properly executed

B. Project with Audio inquiry

　 nRFConnect SDK V2.6.0

    Nordic Example code – “nrf5340_audio”

  1. Nordic example code of “hci_ipc” extracted for coding and we will get zephyr.hex file for net core
  2. Nordic example code of “nrf5340_audio” extracted for coding and we will get zephyr.hex file for application core

Step 2. Application core Layer:

2a) Activate “Open VS Code” IDE in NCS V2.6.0

2b) Select “Add an existing application” and extract “hci_ipc” file moving forward

2c) Click “Add Build Configuration” icon

2d) Select “nrf5340dk_nrf5340_cpuapp” and check Nordic boards, then Execute “Build Configuration”

2e) zephyr.hex file is successfully generated for application core layer if the coding process is properly executed

Find more nRF5340 module development resources in below links:

How To Get started with MDBT53/53V Demo Board Set up (MDBT53-DB-40/MDBT53V-DB-40)

How To USE Nordic Connect SDK (NCS) Flashing Built Code into nRF5340 Module

Edited by Account Manager: Jocelyn Tsai

Raytac Corporation 勁達國際電子股份有限公司 
Bluetooth & WiFi module maker based on Nordic nRF54, nRF53, nRF52, nRF7002 solution
BT5.4 &BT5.3 & BT5.2 & BT5.1 Qualified, FCC/IC/CE/Telec/KC/RCM/SRRC/NCC Pre-Certified. Bluetooth Solution: nRF54, nRF5340, nRF52840, nRF52833, nRF52832, nRF52820, nRF52811, nRF52810, nRF52805, nRF51822 WiFi Solution: nRF7002
www.raytac.com
email:sales@raytac.com
Tel: +886.2.3234.020

2則迴響

  1. 引用通告： Raytac CorporationBT5.2/BT5.1/BT5/BT4.2 Module MakerHow To Get started with Nordic nRF5340 Project by Raytac MDBT53/MDBT53V Development Kit Demo Board, nordic, raytac, Bluetooth, nRF51, nRF52, nRF51822, nRF52832, nRF52840, module, certificate
  2. 引用通告： Raytac CorporationBT5.2/BT5.1/BT5/BT4.2 Module MakerHow To USE Nordic Connect SDK (NCS) Flashing Built Code into nRF5340 Module, nordic, raytac, Bluetooth, nRF51, nRF52, nRF51822, nRF52832, nRF52840, module, certificate

發表留言